Xinsu Global Electronic Co., Limited

How to Use Lithium Batteries Correctly

1. Charging

When you use the lithium batteries, please note that after a period of time, the battery will go into the dormant state. At this time, the battery capacity is lower than the normal value and the service time will be shortened accordingly. However, it is easy to activate the lithium battery. It can be activated by only 3 - 5 normal charging and discharging cycles to restore the normal capacity.

2. When to start charging during normal use

Data on cycle life are listed as follows:

Cycle life (10%DOD): >1000 times

Cycle life (100%DOD): >200 times

Important tips for using properly lithium battery mobile phone

1. Charge in accordance with the standard time and procedure, even for the first three times;

2. When the message "the phone's battery level is too low" is shown, please start charging as soon as possible;

3. When you activate the lithium battery, you don’t need special methods. If you use the mobile phone normally, the lithium battery will be activated naturally.

The service life of the lithium battery can be improved if you use li ion battery charger 29.4 v properly.

Mistakes about charging the lithium battery

Mistake 1: The battery should be charged and discharged three times to activate it if you purchasing it for the first time.

Mistake 2: If you charging the battery at the first time, it must last 12 hours.

Mistake 3: The battery needs to be fully charged once a month.

Mistake 4: If the battery is working while charging, or continuing to use external power after charging, the host and battery will be damaged.
Related Content
  • Functional Principle of Intelligent Charger

    Functional Principle of Intelligent Charger

    August 1, 2018The intelligent digital battery charger is a general-type intelligent charger. In accordance with the characteristics of each battery, different charging modes and corresponding algorithms can be give...view
  • Celebrating the Success of Xinsu Global Exhibition in HongKong Electronics Fair

    Celebrating the Success of Xinsu Global Exhibition in HongKong Electronics Fair

    October 23, 2018HongKongAutumn Electronics Fair was held on 13th-16th, October of2018. Xinsu Global took the certified power supply with the newest safetystandard of IEC62368 attending the HK fair. Our power adapters...view
  • Jan 8-11th 2019 CES  Booth No. 62503

    Jan 8-11th 2019 CES Booth No. 62503

    October 29, 2018Welcome to visit our CES Booth No. 62503Date: Jan 8-11th, 2019LAS VEGAS, NV, USA We are waiting for you! ^_^view
  • Application Prospects of Intelligent Digital Charger

    Application Prospects of Intelligent Digital Charger

    August 1, 2018At present, the most promising chargers in the charger market are the intelligent digital battery chargers, which are determined by the unparalleled advantages of the electric vehicles. With the advan...view
  • New UL Certification Ul62368 Is Coming

    New UL Certification Ul62368 Is Coming

    December 25, 2017UL has announced that since June 20th, 2019, audio and video products, IT products and telecommunication products have to apply for UL certification of the new one UL62368-1 instead of the EN60950-1 a...view
  • US DOE VI Efficiency Standard

    US DOE VI Efficiency Standard

    December 25, 2017DoE VI energy efficiency certification is an energy efficiency VI reports evaluated and issued by U.S. energy department. DoE VI energy efficiency is a standard for electric power resource utilization...view
  • TEL:+86-0755-29706858
  • FAX:+86-0755-29706859
  • EMAIL:sale@xinsuglobal.com
  • ADDRESS:3rd Floor, No. 1 Building,C district,108 Honghu Road,Yanluo Street,Baoan District, Shenzhen,Guangdong, China 518127